Selecting Various Repeat Functions; Viewing The Disc Playback Information - Toshiba SD3010KE Owner's Manual

Playback Feature
Zooming In
This function allows you to enlarge the picture on the
TV screen and to pan through the enlarged picture.
During playback, press ZOOM repeatedly to display
A
the picture with different scales.
Use /// to pan through the enlarged picture.
Playback will continue.
Press ZOOM repeatedly to return to the original size.
B
Slow Motion
Press SLOW during playback to select the required
A
speed: 1/2, 1/4, 1/8( forward only ).
Sound will be muted.
To return to normal speed, press PLAY/ PAUSE
B
Forward/ Reverse Searching
You can fast forward or fast reverse a disc during
playback and select a desired search speed.
For DVD,VCD, SVCD,CD, MP3
During playback, press F.R/ F.F to select the required
A
speed: X2, X8, X30, X100(backward or forward).
Sound will be muted (DVD/VCD/SVCD/MP3) or
intermittent (CD).
To return to normal speed, press PLAY / PAUSE
B

Selecting various repeat functions

Repeat play mode
The repeat play options vary depending on the disc
type.
While playing a disc, press REPEAT repeatedly to
A
choose a repeat option.
For DVD
-Repeat Chapter (currently playing chapter)
-Repeat Title (currently playing title)
-Off (cancel)
For Video CD, Audio CD
-Repeat Single (currently playing track)
-Repeat All (entire disc)
-Off (cancel)
For MP3, JPEG
-Repeat Single (currently playing file)
-Repeat All (current folder)
-Off (cancel)
Tip:
-For VCD2.0/SVCD discs, repeat playback is not
possible if the PBC mode is turned on.
Repeating a section within a title/track
You can repeat the playback of a specific segment
within a title or track. To do this, you must mark the
start and end of the segment you want.
While playing a disc, press A - B at your chosen
A
starting point.
Press A - B again at your chosen end point.
B
 The section will now repeat continuously.
Helpful hint ： The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.

To exit the sequence, press A - B.
C

Viewing the disc playback Information

You can view the disc information (such as current
title/chapter/track number, total playing time or
remaining time on the disc) without interrupting the
disc playback.
During playback, press DISPLAY to display the
A
status of the disc.
The following display appears.
For VCD:
VCD 2.0
Time 00:02:10/00:03:00
.
Track 1/14
For DVD:
DVD Video
Time 00:03:33/01:24:46
Title 1/1
Chapter 2/8
Press DISPLAY again.
B
Audio 1/1 D 5.1Ch Eng
Subtitle 1/1 Eng
Angle 1/1
To turn off the display, press DISPLAY again.
C
.
Title/Chapter/Track/Time selection
Press T-SEARCH, then press / to select
A
{ Time }, { Title }, { Chapter } or { Track }.
For VCD：
PBC OFF
Search
Track
Time --:--:--
Disc Time --:--:--
For DVD:
Search
Title
Chapter
Time --:--:--
Use the number buttons ( 0-9 ) to input a valid
B
number or time("0" cannot be input as the first
number). (This function only apply to DVD/VCD/CD/
SVCD.)
Press OK to confirm.
C
The playback skips to the selected title/chapter/
track/time.
Angle
 When {Angle} information appears on the screen,
press ANGLE button on the remote control
repeatedly to switch between different angles.
Playback will go to the selected angle.
(Elapsed/remaining time for current track)
(Track No.(If PBC is enabled, "PBC on"
will be displayed))
(Elapsed/remaining time for current title)
(Title No.)
(Chapter No.)
(Audio type)
(Subtilte)
(Angle)
2
(Desired time of the current track)
(Desired time of the disc)
1
---
(Desired time of the disc)