Programming Channels With Alpha Characters - Uniden UBC180XLT Operating Manual

2.
Press and hold the
preprogrammed Search Bands. Use the
keys or VFO control until you see the Band you want.
3.
Wait for at least 2 seconds or press
Search to begin. If you wish to change the search
direction, press and hold
up or down direction.
4.
When Search stops on a desired frequency, press
to stay on that frequency. The next available empty
channel to store the frequency will be blinking on
the display.
5.
To store the displayed frequency into that channel,
press
the programming.
6.
To store the displayed frequency into another channel:
a.
Select the channel number with the numeric keys,
and press
on the display. The frequency currently stored in the
channel will appear for 2 seconds and then will be
replaced by the frequency located from the search.
b.
Press
confirm the programming.
Note: If all channels have already been programmed and
key is pressed, "Full" is displayed. To program the
frequency, press
programming, press

Programming Channels with Alpha Characters

Use this feature to name channels (up to 100 channels) for
easy reference.
1.
Select the channel.
2.
Press
" " appears on the display.
. The frequency will blink twice to confirm
. The selected channel will appear
. The frequency will blink twice to
key again. To cancel the
/ ALERT to go to the Alpha Name display,
/ BAND key to display the
or
key.
16
and
/ BAND for
to search in an