Calibration
For calibration, see manufacturer's instruction guide or contact Liko.
Technical Data
Display resolution:
0.1 lb / 0.1 kg
Accuracy:
0.1 % +/- Digit of reading
Max. load:
200 kg (440 lbs.)
Min. load:
10 kg (22 lbs.)
Reset:
One button reset ( "ZERO" )
Power supply:
9 V Battery
Display:
Digital, liquid crystal (LCD)
Size:
76 x 76 x 102 mm (3 x 3 x 4 in.) (W x L x H)
Weight:
0.6 kg (1.3 lbs.)
+
Temperature range:
10
o
C to
Humidity range:
0% - 95%
Distributor:
Manufacturer:
Liko AB
SR Instruments, Inc
SE-975 92 Luleå
600 Young Street
Sweden
Tonawanda, NY 14150
info@liko.se
USA
+
40
o
C (+50
o
F to +104
o
F)
w w w . l i k o . com
LikoScale 200
Prod. No. 3156225
LikoScale 200 is a convenient, easy-to-use scale that is intended for weighing patients
in Liko mobile or stationary lifts. Together with Liko's lifts and lifting accessories,
LikoScale 200 enables safe and easy weighing.
The weight is shown on the scale's digital display. By selecting unit mode the scale can
display either kg or lbs.
The scale should only be used in combination with approved lifts and accessories in
accordance with the instructions in this guide.
LikoScale 200 can be used with the following Liko lifts:
Viking (S, M, L, XL)
- require Adapter 12 mm, Prod. No. 2016504.
Uno (all models)
- Uno models with serial numbers from 31825 require
Adapter 12 mm, Prod. No. 2016504.
- Uno models with serial numbers up to 31824 require
Adapter 8 mm, Prod. No. 2016502.
As the lifting height is limited when LikoScale is used in combination with LikoLight or Viking XS, we
do not recommend these alternatives.
* This user guide is a complement to the complete documentation issued by the manufacturer of
the scale. The intention with this document is to make it easier for our customers to use LikoScale
in combination with Liko's products. For detailed information regarding the scale we refer you to the
manufacturer's Operation Guide (attached).
User Guide*
7EN160154-03
2009-08-20
Golvo (all models)
Likorall (all models)
Multirall (all models)
Liko MasterLift (all models)
Need help?
Do you have a question about the LikoScale 200 and is the answer not in the manual?
Questions and answers