Table 1-7 Description Of Wss50 Front Panel; Table 1-8 Pins And Indicators For Subscriber Line (Fxs) Or Trunk Line (Fxo) Of Wss50; Table 1-9 For Pin And Indicator Table Of Ethernet Ports; Table 1-10 Indicators Of Wss50 - Real Tone Technology WSS Voice Gateway Series User Configuration Manual

Table 1-7 Description of WSS50 Front Panel

#
①
②
③
④
⑤、⑥、⑦

Table 1-8 Pins and Indicators for Subscriber Line (FXS) or Trunk Line (FXO) of WSS50

Pin
1 2
NC NC
Note: The yellow LED on RJ45 socket works only in the mixed FXS/FXO type configuration of
Gateway. The yellow LED light on indicates the interface is FXO type, and the yellow light off
indicates the interface is FXS type. In an equipment with only FXS-type or FXO-type configuration,
the yellow LED dose not work and remains off.

Table 1-9 for Pin and Indicator Table of Ethernet Ports

Pin
1
TX+

Table 1-10 Indicators of WSS50

Mark
PWR
STATUS
ALARM
Real Tone Technology Co., Lted
Description
Offer the first 8 analog line interfaces (FXS or FXO)，interface type is RJ45.
th th
Offer 9 -16 analog line interfaces (FXS or FXO), interface type is RJ45.
th th
Offer 17 -24 analog line interfaces (FXS or FXO), interface type is RJ45.
When the total system capacity of WSS50 is 16 lines, these interfaces will not
be provided.
One 10/100M Ethernet uplink interface (WAN) and one 10/100M Ethernet
user interface (LAN), interface type is RJ45. The uplink interface is used IP
port for signaling and voice traffic. The user interface is reserved for future
use.
Three indicators of PWR, STATUS and ALARM represent the power, status
and alarm respectively. Specific meanings of these indicators are described in
Table 1-10.
3 4 5
NC Ring Tip
2 3
TX- RX+
Function Status
Green
Power
Indication
Off
Off
Green
Flash
Status
Constant
Indication
Red
Red Flash
Green
Alarm
Red Flash
Indication
Red
www.realtonetech.com
6 7 8
NC NC NC
LED
6 Yellow
Connection
RX-
Status
Description
Power on
Power off
System locked and inactive
Normal Operation
System in the process of power up and not in the
normal operation mode
System in a diagnostic mode and able to execute
limited operation
No alarms
New alarms occurred but not confirmed
Alarms existed and all alarm information
confirmed
Page 13/67
LED
Yellow Green
Interface Interface
Type Status
Green
Activity
Status