Removal And Installation Of The Sealant Canister - Buick Enclave 2008 Owner's Manual

11. Turn off the air compressor by pushing the On/Off
button (B).
Be careful while handling the tire sealant and
compressor kit as they could be hot after usage.
12. Unplug the air compressor accessory plug and
wrap it back into place.
CAUTION:
{
Storing the tire sealant and compressor
kit or other equipment in the passenger
compartment of the vehicle could cause injury.
In a sudden stop or collision, loose equipment
could strike someone. Store the tire sealant
and compressor kit in its original location.
13. Disconnect the air only hose (G) from the tire valve
stem by turning it counterclockwise.
14. Wrap the air only hose (G) around the side of the
air compressor channel to stow it back in its
original location.
15. Return the equipment to its original storage location
of your vehicle.
Removal and Installation of the Sealant
Canister
To remove the sealant canister, do the following:
1. Unwrap the sealant/air hose from the compressor.
2. Push the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister. See your
dealer/retailer for the new canister.
5. Push the new canister into place.
5-79