Advertisement
4. Description of the fixture
1
. Iris: It is used to adjust the diameter of the openness for light to pass through
2.
Color temperature filter: 5600K .
3.
Magenta: It is used to get the color of magenta.
4.
Yellow: It is used to get the color of yellow.
5.
Cyan: It is used to get the color of Cyan.
6.
Zoom: It is used to adjust zoom out or zoom in of the image or light.
7.
Focus: It is used to focus the projection to have a clear and precise spot.
8.
Dimmer: It is used to adjust the dimmer.
5. Troubleshooting
Following are a few common problems that may occur during operation. Here are
some suggestions for easy troubleshooting:
A. The unit does not work, no light and the fan does not work
1. Check the connect power and main fuse.
2. Measure the mains voltage on the main connector.
D. The lamp is cutting out intermittently
1. The lamp is not working well. Check the main voltage either too high or too low.
2. Internal temperature may be too high. Check and if necessary replace the fan.
6A
Advertisement
