Advertisement
1. Safety Instruction
Please read the instruction carefully which includes important
information about installation, operation and maintenance.
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user,
be sure that they also receive this user guide.
Unpack and check carefully there is no transportation damage before using the unit.
Before operating, ensure that the voltage and frequency of power supply match the
power requirements of the unit.
It's important to ground the yellow/green conductor to earth in order to avoid electric
shock.
The unit is for indoor use only and only in a dry location.
Disconnect main power before lamp replacement or servicing.
Replace lamp only with the same type. Do not use any other type of lamp.
Make sure there are no flammable materials close to the unit while operating as it is
fire hazard.
Maximum ambient temperature is TA: 40℃. Don't operate it where the temperature is
higher than this.
Don't touch the housing bare-hand during its operation. Turn off the power and allow
about 15 minutes for the unit to cool down before replacing bulb or serving as the unit
could be very hot.
In the event of serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out by unskilled people can lead to damage
or malfunction. Please contact the nearest authorized technical assistance center.
Always use the same type spare parts.
Do not touch any wire during operation as high voltage might be causing electric
shock.
2A
Advertisement
