Advanced Serialize - Brother P-Touch PT-E550W Quick Setup Manual

5
Press the OK or Enter key to display the screen that you set.
Example:
• When you press the Serialize key, you can do the setting again. After redoing the setting,
the message "OK to Overwrite the Data after This Position?" is shown. If it's ok to
overwrite, press OK key.
• You can select All/Current/Range when printing as there are multiple pages of labels.
• To print labels refer to the User's Guide.

Advanced Serialize

 Simultaneous
1
Enter text.
Example: Create labels 1A-A01, 1A-B02, 1A-C03, 1A-D04
from 1A-A01 by using this function.
2
Press the Shift and Serialize keys and select "Simultaneous" by
using the or
3
Specify the first range of characters that you want to increase.
• To specify one character, use the
the cursor under the character and press the OK or Enter key
twice.
• To specify a range of characters, use the
position the cursor under the first character in the range and
press the OK or Enter key. Then, position the cursor under the
last character in the range and press the OK or Enter key.
Example: Select 1 of A01.
4
Repeat step 3 to specify the second range of characters that you
want to increase.
Example: Select A of A01.
You cannot select the first character(s) because it is grayed out.
5
Select "Count" and "Incremented by" by using the
set the value by using the
Example: When you want to increase the number by one four
times, set "Count": 4, "Incremented by": 1.
key and press the OK or Enter key.
,
or key.
, or key to position
, , or key to
or key and
Entering a Serialize Label
41