Table of Contents
Advertisement
Quick Links
24hr. wireless intruder & fire alert system
Quick Start Guide
Welcome to monitor
Installing your new 24hr. home protection system is quick and easy. The only tools you'll
need are an electric drill, a 5mm drill bit and a selection of screwdrivers.
Checklist
Have a quick check to see that you have each of
the following in your monitor box:
• 1 control panel (with phone cable and
power supply transformer connected)
• 2 PIR motion sensors
• 1 smoke detector
• 1 remote control key chain
• Screws and wall plugs for fixing
• 2 monitor window stickers
• 5 wallet cards for you to give to your
nominated contacts
• User guide and customer information
If any items are missing please call 0845 071 1007.
7 Simple Steps
Follow the 7 simple steps to getting started and
you'll have your monitor home protection system
up and running in no time.
The system has been designed for easy
self-installation and all the sensors are
preprogrammed. It normally takes less than an
hour to install the whole system.
1. Connect the battery
2. Fit the control panel
3. Install the motion sensors
4. Install the smoke detector
5. Set the clock
6. Register and setup your system online
7. Test the system
Way better
than a guard
dog.
version 2.1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Monitor 24hr home protection system
Summary of Contents for Monitor 24hr home protection system
-
Page 1: Quick Start Guide
1. Connect the battery Follow the 7 simple steps to getting started and 2. Fit the control panel you’ll have your monitor home protection system 3. Install the motion sensors up and running in no time. 4. Install the smoke detector The system has been designed for easy 5. - Page 2 Step One – Connect the battery Step Two – Fit the Control Panel 1. Open the Control Panel cover by pressing down 1. Choose a location close to the door you on the tab on the top of the panel. usually use to come and go from your home, ensuring it’s close to a phone line and an electric socket.
- Page 3 Step Three – Install Motion Sensors the mounting bracket to ensure the sensor faces down. If you prefer corner mounting, punch out the holes at each side. Remember that each sensor must face downwards, so you must only punch out holes at the bottom of the mounting bracket.
- Page 4 Step Four – Install the Smoke Detector IMPORTANT: You must install the batteries (provided) before installing the smoke detector. You will be unable to connect the detector to the mounting base without the batteries installed. Selecting a suitable location is critical to the operation of the smoke detector.
- Page 5 (call customer service on 0845 071 1007 if this number does not match). Step Seven – Test the System 3. Click on the ‘”My monitor system” menu option 1 ‘Arm your system’ test and ‘Register your panel’ button and follow the Press the ‘Motion Sensors’...
- Page 6 The control monitoring centre to inform you that the panel will return to any sensor you’ve not yet monitor system has been activated. You’ll be tripped and tested, so don’t worry about tripping contacted on the numbers you have chosen and them in the order that you installed them.
- Page 7 If you need help to cancel the panel beeps or reduce the volume, please call us on 0845 071 1007 My Master Access Code For further help and advice about your monitor 24hr. wireless intruder & fire alert system purchase additional sensors,...
- Page 8 Optional extras for even tighter security We offer a full range of accessories for your monitor system. To find out more, visit www.myhomemonitor.co.uk or call our Customer Services Team on 0845 071 1007. Enjoy your retirement Fido SUPPORT monitor Customer Service...
Need help?
Do you have a question about the 24hr home protection system and is the answer not in the manual?
Questions and answers