How To Use This Guide; How To Assemble Your Steam Mop - Bissell 1867 SERIES User Manual

How to Use This Guide

This User's Guide has been designed to help you get the utmost
satisfaction from your BISSELL Steam Mop bare floor steam cleaner.
You'll find assembly and operating instructions, safety precautions,
maintenance and troubleshooting instructions.
Pay particular attention to the parts diagram, assembly instructions,
and part names. Following this User's Guide will greatly enhance your
ability to get the best performance from your BISSELL Steam Mop
for many years.
Your Steam Mop assembles quickly and easily. The only tool you will
need to assemble your cleaner is a Phillips Head Screwdriver.
Your Steam Mop is packaged with the following items:
Handle Assembly 1 Large Philips Head Screw
Lower Body with Filter 1 Small Philips Head Screw
Swivel Head 2 Mop Pads
Water Tank Storage Hook with 2 Screws

How To Assemble Your Steam Mop

TM
1.
Attach Swivel Head.
Secure Swivel Head with small Phillips Head
2.
Tighten until secure.
Slide Handle Assembly down into Lower Body until it will go
3.
no further.
Secure the handle by placing the Large Phillips Head
Screw through the screw opening in the Lower Body and into
4.
the rear of the Handle Assembly. Tighten with screwdriver
until secure.
Slide Water Tank onto Lower Body by lining up vertical glides
and gently sliding tank into place.
5.
1
Screw.
2
3
4
5
5