Advertisement
The unit should be located on a solid surface
without any packing materials. When moving
the unit, never tilt it over 45 degrees nor
apply force on pipes or door handle to avoid
potential damages.
The unit should be kept clear away from any
objects for ventilation.
Do not locate the unit in a damp area or near
a sink. Use a soft cloth to wipe the unit if
necessary.
This sign is directly related to operator safety and equipment safety. The contents
and instructions that follow the sign must be strictly followed.
This sign refers to prohibited actions. Violation may result in damage of the
freezer or compromise the operator's safety.
Keep the unit away from direct sunlight or any
heat source. The freezer should only operate
at an ambient cooler than 32
Do not operate the unit in an ambient
temperature bellow 5 .The best temperature
range is 18 ~ 25
Never place the unit in an outdoor area.
Freezer Defrosting, Storage of Unit
Defrosting
1.During normal usage of the unit, the interior
of the unit accumulates frost. If this layer of
frost is too thick, refrigeration effect is
negatively impacted. Electricity consumption
rate will increase.
Therefore, when the
thickness of the frost is about 10 mm, please
use the plastic scraper to remove the frost.
3.When the frost thaws, use a soft cloth to
absorb water, then use a dry cloth to wipe
clean the interior of the unit. Power the unit
back up.
Let the unit run down to set
temperature. Place the original goods back in
the freezer.
Decommission of freezer
If you need to store your unit for a long time,
make sure that you disconnect the power.
Open the door, thaw out the frost and dry the
unit.
Then the unit can be put away for
storage.
If you need to discard the unit,
please make sure to keep it away from a fire
source. Send the unit to a proper place for
disposure.
2.Before the defrost process starts, remove all
stored goods from the unit and place them in
another freezer for temporary storage. During
defrost, open the freezer door to let the unit air
out.
4.To speed up the defrost process; you may
place a flat container of warm water at 50
the freezer.
Warning:
Do not use an electric heater to
defrost the unit. Do not use a metallic tool or
a sharp tool to scrap the frost on the unit.
in
Advertisement
