Installation and Setup The Vestax Typhoon is a class compliant USB plug and play device for Vestax Typhoon Control Function both Mac and Windows and does not require any further driver installation. MASTER OUT RCA Master Output 1. Download and install the latest version of Serato DJ from http://serato.
FX bank, and adjust only one parameter, the FX Depth. The same effects NOTE: You can not MIDI Map your Vestax Typhoon, you will need to available in Single FX mode are available in Multi FX mode, as well some connect an additional MIDI controller to use these MIDI functions.
Page 5
NOTE: SHIFT button is used with other buttons that have shift modifier functions Numark N4 Control Function SHIFT Function PLAY/PAUSE Play/Pause track Stutter Play PLATTER Touch the top to scratch or jog. Moving the outside of the wheel will jog. Pitch bend up Pitch bend down SYNC...
NOTE: When using the CUE function, you can adjust the CUE MIX between the cue output and the master output. This is done by using CUE MIX found in the SETUP screen under the MIXER tab. NOTE: Due to Vestax Typhoon mapping limitations, there is no Sync Off functionality. To turn Sync Off, click the OFF button on screen in Serato DJ Using the Tool Tips Click on the icon to enable Tool Tips.
Need help?
Do you have a question about the TYPHOON and is the answer not in the manual?
Questions and answers