Count.down - Kagan MegaTimer Instruction Manual

The Count Down timer counts down from a preset time or from a
set time to 00:00 and triggers an alarm. The display shows
Minutes : Seconds with a maximum of 99 minutes : 59 seconds.
To View the Count Down Timer
Press the Count Down button. The last set countdown time is displayed.
To Use Preset Count Down Times
1. In the Count Down mode, press the Count Down button. Each press
cycles through preset times in the following sequence:
– 00:10 (10 seconds)
– 00:30 (30 seconds)
– 01:00 (1 minute)
– 02:00 (2 minutes)
– 04:00 (4 minutes)
– 10:00 (10 minutes)
– 15:00 (15 minutes)
– 30:00 (30 minutes)
– 45:00 (45 minutes)
– 60:00 (1 hour)
2. Press the Start button to count down from the selected preset time.
To Set the Count Down Timer
1. Hold down the Count Down button until the top display prompts,
"SET MIN."
2. Use the Up and Down arrows to set the minutes.
3. Press the Count Down button. The top display prompts, "SET SEC."
4. Use the Up and Down arrows to set the seconds.
5. Press Start to begin countdown or press the Count Down button
to display the set countdown.
(Tip: If your desired countdown time is close to a preset, go to the preset time
first to speed up setting your countdown time.)
(Tip: Hold down the Start/Stop button to clear Count Down to 00:01.)
To Turn Off a Beeping Alarm
Once the Count Down alarm is beeping, it may be turned off by pressing the
Stop button.
(Note: The alarm will turn off automatically after 30 seconds.)

Kagan Publishing • (800) 933-2667 • www.KaganOnline.com
Count Down Count Down
MegaTimer™ Instruction Manual