Table of Contents
Advertisement
tool. Distractions are able to result in
the loss of control of the tool.
personal safety
a.
Stay alert. Watch what you are do-
ing and use common sense when
operating the tool. Do not use the
tool while tired or under the influ-
ence of drugs, alcohol, or medica-
tion. A moment of inattention while
operating the tool increases the risk
of injury to persons.
dress properly. do not wear loose
b.
clothing or jewelry. contain long
hair. keep hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
increases the risk of injury to persons
as a result of being caught in moving
parts.
c.
Avoid unintentional starting. Be
sure the switch is off before con-
necting to the air supply.
d.
do not overreach. keep proper
footing and balance at all times.
Proper footing and balance enables
better control of the tool in unexpect-
ed situations.
e.
use safety equipment. A
dust mask, non-skid safety
shoes and a hard hat must
be used for the applicable
conditions. Wear heavy-duty work
gloves during use.
f.
Always wear eye protec-
tion. Wear ANSI-ap-
proved safety goggles.
Always wear hearing
g.
protection when using
the tool. Prolonged expo-
SKU 98178
for technical questions, please call 1-800-444-3353.
sure to high intensity noise is able to
cause hearing loss.
h.
risk of electric Shock. This tool
is not provided with an insulated
gripping surface. Contact with a
"live" wire will also make exposed
metal parts of the tool "live" and
shock the operator.
Tool use and care
a.
Use clamps or another practical
way to secure and support the
ATV or Motorcycle on the platform.
Holding the work by hand or against
the body is unstable and is able to
lead to loss of control.
b.
do not force the tool.
correct tool for the application. The
correct tool will do the job better and
safer at the rate for which the tool is
designed.
c.
do not use the tool if the switch
does not turn the tool on or off.
Any tool that cannot be controlled
with the switch is dangerous and
must be repaired.
d.
disconnect the tool from the air
source before making any adjust-
ments, changing accessories, or
storing the tool. Such preventive
safety measures reduce the risk of
starting the tool unintentionally. Turn
off and detach the air supply, safely
discharge any residual air pressure,
and release the throttle and/or turn
the switch to its off position before
leaving the work area.
e.
Store the tool when it is idle out of
reach of children and other un-
trained persons. A tool is dangerous
in the hands of untrained users.
Use the
Page 3
Advertisement
Table of Contents
