JVC AV-28X37SUE Service Manual page 18

AV-28X37SUE AV-28X37HKE
AV-28X35HKE AV-28X37HIE
AV-28H35SUE AV-28H35BUE
AV-28X35HUE
(3) METHOD OF SETTING
1) METHOD OF SETTING 1.IF
[1.VCO] : It must not adjust without signal.
Key
(a) [1]
(b) [1]
(c) [INFORMATION]
2) METHOD OF SETTING 2.V/C, 4.DEF AND 5.VSM PRESET.
Key
(a) [2~5]
(b) FUNCTION UP /
DOWN (
(c) FUNCTION -/+
( )
(d) OK
(e) INFORMATION
Do not setting 3.AUDIO, 6.STATUS, 8.SURROUND, 9.SHIPPING (OFF) and 0.BUS FREE.
(4) RELEASE OF SERVICE MENU
After completing the setting, return to the SERVICE MENU, then again press the INFORMATION key.
1-18 (No.52106)
Select 1.IF
Select 1.VCO (CW)
Make sure that the arrow position between the ABOVE REF and BELOW REF.
Return to the SERVICE MENU screen.
Select one from 2.V/C, 3.AUDIO, 4.DEF and 5.VSM PRESET.
Select setting items.
)
Set (adjust) the setting values of the setting items.
Memorize the setting value.
(Before storing the setting values in memory, do not press the CH, TV, POWER ON
/ OFF key if you do, the values will not be stored in memory.)
Return to the SERVICE MENU screen.
Function
Function