Mini Clubman Owner's Manual page 152

Mobility
Socket for On-Board
Diagnosis OBD
The primary components that make up the
emissions can be checked by a device via the
OBD socket.
Emissions
The warning lamps come on. The vehicle
is producing higher emissions. You can
continue your journey, but moderate
your speed and exercise due caution.
Have the car checked as soon as possible.
Under certain circumstances, one of the lamps
will flash or light up continuously. This indicates
excessive misfiring or a malfunction in the
engine. If this happens, reduce your speed and
visit the nearest MINI dealer as soon as possible.
Severe misfiring can quickly lead to serious dam-
age of emissions-related components, espe-
cially the catalytic converter. In addition,
mechanical engine components can become
damaged.
If the fuel filler cap is not properly
tightened, the OBD system may con-
clude that fuel vapors are escaping,
causing an indicator to light up. If the filler cap is
then tightened, the indicator should go out
within a few days.
150
Maintenance
Online Edition for Part no. 01 40 2 608 455 - © 07/11 BMW AG Online Edition for Part no. 01 40 2 608 455 - © 07/11 BMW AG
Data memory
Your vehicle displays data about the operation,
malfunctions, and user settings. These data are
stored in the vehicle and can be partly stored in
the remote control; the data can be read by
suitable devices, in particular at your service
center. The data read out are used for support-
ing the service processes and repair or for opti-
mization and development of vehicle functions.