Stopping The Engine - Husqvarna 115 127127 IR Operator's Manual

Stopping the Engine

Allow the engine to idle a minute in order to attain
normal operating temperature before stopping it, if
it has been worked hard. Avoid idling the engine for
longer periods, as there is a risk of the spark plugs
fouling.
• Disengage the mower deck by depressing the
blade switch.
• Raise the mower deck by pressing the release
button on the lever and pulling fully backward to
the transport position.
• When the machine is standing still, activate the
parking brake by pushing the lever release button
and pulling the lever upward.
• Move the throttle to the minimum position (tortoise
symbol). Turn the ignition key to the stop position.
• Move the steering controls outward.
• Remove key. Always remove key when leaving the
mower to prevent unauthorized use.
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than "OFF" will cause the battery to
be discharged.
32
-Husqvarna
OPERATION
Disengage the mower deck and move throttle to minimum
Mower deck lifting lever
Place controls in neutral position to stop
UP
CHOKE
BLADES ON
DOWN
BLADES OFF
8052-001
8058-019
8061-020