Troubleshooting - Radio Shack CD Graphics Karaoke System Owner's Manual

ˆ Troubleshooting
If your karaoke system is not working properly, the following suggestions might help.
Problem
No power when
POWER is on.
No sound.
Sound from an audio
cassette tape is irregu-
lar or distorted.
Cannot record.
CD skips or will not
play.
No song lyrics appear
on screen.
If you cannot find the problem, take your karaoke system to your local RadioShack
store for assistance.
12
Possible Cause
No power plug connection at the
AC outlet.
MASTER VOLUME or MIC
VOLUME is set to the lowest
setting.
The wrong function is selected.
Dirty head or capstan.
Irregular cassette tape winding.
The erase-prevention tabs have
been removed from the
cassette.
Disc is inserted upside down.
Disc is dirty.
Disc is scratched.
Moisture has formed inside the
CD deck.
Video cable is not connected
properly to the TV.
TV's source selector is not set
to VIDEO.
Solution
Insert the power plug into the
AC outlet.
Adjust MASTER VOLUME or
MIC VOLUME.
Slide FUNCTION SELECT to
the correct function.
See "Cleaning the Tape-Han-
dling Parts" on Page 14.
See "Restoring Tape Tension
and Sound Quality" on Page 14.
See "Preventing Accidental Era-
sure" on Page 14.
Insert CD correctly.
Wipe clean with soft cloth.
Use a new disc.
Turn the CD player on and let it
dry for 20 to 30 minutes.
Connect the video cable to
VIDEO OUT and to the TV's
VIDEO IN.
Use your TV's remote control to
select VIDEO.