Winter Use - Husqvarna 55 Operator's Manual

Winter use

Running problems can occur when using the machine in the
cold and snowy conditions caused by:
• Too low engine temperature.
• Icing of the air filter and carburettor.
Special measures are therefore often required:
• Partly mask the air inlet on the starter to increase the
working temperature of the engine.
• Preheat the intake air to the carburettor by using the heat
from the cylinder.
Temperature 0° ° ° ° C or colder:
Twist the cover so that preheated air from the cylinder can
enter the carburettor space to prevent icing of the air filter,
etc., then fit the rubber seal to the fuel pipe by the main air
intake.
IMPORTANT! If the temperature rises above -5°C or 0°C
respectively the machine MUST be restored to its normal
set-up. Otherwise there is a risk of overheating, which can
cause severe engine damage.
IMPORTANT! Any maintenance other than that described in
this manual must be carried out by your servicing dealer
(retailer).
MAINTENANCE
– 35
English