Using The Camera Underwater - Panasonic Lumix DMC-FT2 Basic Operating Instructions Manual

Hide thumbs Also See for Lumix DMC-FT2:
Table of Contents

Advertisement

Use the camera underwater up to 10 m depth, water temperature from 0 oC to
40 oC, and not longer than 60 minutes continuously.
If there is a water or dirt on the camera, use it after wiping it off with a dry soft
cloth and dried at well ventilated area.
Do not open or close the card/battery door or terminal cover.
Do not apply shock to the camera underwater. (Waterproof performance may not
be maintained, and there is a chance of water leak.)
Do not dive into the water holding the camera. Do not use the camera at the
location where the water will splash strongly, such as rapid flow or waterfall.
(Strong water pressure may be applied, and it may cause malfunction.)
The camera will sink in the water. Take care not to drop the camera and lose it
underwater by securely placing the hand strap around your wrist or similar
measure.
Do not use it in the hot water over 40 oC (in the bath or hot spring).
When the camera is splashed with detergent, soap, hot spring, bath additive,
sun oil, sun screen, chemical, etc., wipe it off immediately.
Card and battery are not waterproof. Do not handle with a wet hand. Also, do not
insert wet card or battery into the camera.
12
VQT2M46 (ENG)

Using the camera underwater

Advertisement

Table of Contents
loading

Table of Contents