I.D. AL - VP100 Full HD 1080p video player - User manual Table of contents A - Safety instructions B - Product information 1 - Product presentation 2 - Functionnalities 3 - Installation 4 - Operating mode 4.1 - First use 4.2 - Play manually the audio/video files...
I.D. AL - VP100 Full HD 1080p video player - User manual CAUTION! DO NOT EXPOSE TO HUMIDITY & DUST! Unplug the power supply cable before any servicing FOR YOUR SAFETY, PLEASE READ THE USER’S GUIDE CAREFULLY BEFORE OPERATING YOUR PLAYER.
Page 4
I.D. AL - VP100 Full HD 1080p video player - User manual conversion of the device automatically entails loss of the homologation. The operation of a modified device is liable to a penalty. In the interest of occupational safety, the operator and the user are held responsible for complying with the regulations.
I.D. AL - VP100 Full HD 1080p video player - User manual A.6 - Terms of use: • This product has been designed for indoors use only. • If this device has been exposed to very high temperature fluctuations (e.g.: after transportation), do not connect it immediately.
I.D. AL - VP100 Full HD 1080p video player - User manual 1 - Product presentation The VP100 is a Audio/Vidéo full HD player. The files are stored on a SD/SDHC Card or USB device, stick or hard disk. This standalone player can read files automatically when switch on.
Ethernet link, time and date ... 1 -Connect the VP100 to a display using HDMI or VGA out. Connect the power supply but don’t insert a media (SD or USB). Status LED change from red to orange and green for about 1 minute. Main menu is now displayed.
3 - When player is ready, status LED change to green. At this moment, the VP100 start to play the files in the "_autoplay" folder in accordance to the «AutoPlay» option in the Setup menu. (see chapter 6.3). To stop, press ESC key using the remote control.
I.D. AL - VP100 Full HD 1080p video player - User manual 1 - To do this procedure, you have to use a USB flash memory formated in FAT32*. From here, 2 cases are possibles : A - Create a folder named "_replaceall" if you want to replace every file in the "_autoplay" folder of the SD Card.
(see chapter 6.3) to use the "playlist.txt" file when switch on. 5.2 - Add your logo at boot With the VP100 you can display an image of your choice when switch on during few seconds juste before the main menu or play the first file.
I.D. AL - VP100 Full HD 1080p video player - User manual 6 - Configuration You can change some parameters to adapt the uses to your requirement. All the parameters are included in the Setup menu. From the main menu, select «Setup» with the remote control and press OK.
I.D. AL - VP100 Full HD 1080p video player - User manual 6.2 - Network - Setup Ethernet parameters In this menu, you can set the Ethernet parameters. - NetMon Info* : Display DNS, IP and PORT information of the NetMon server.
I.D. AL - VP100 Full HD 1080p video player - User manual 6.4 - Slideshow Time In this menu, you can set the time between image from 1 up to 255 seconds, using the slide show mode. 6.5 - Baudrate - Setup RS232 internal link In this menu, you can set the baudrate of the internal RS232 link.
I.D. AL - VP100 Full HD 1080p video player - User manual 6.7 - FTP User - Réglage des paramètres FTP In this menu, you can set the FTP parameters. - User : Name of the user. Default is "admin".
I.D. AL - VP100 Full HD 1080p video player - User manual 7 - Automatic power on/off You can wake up or put on sleep the player automatically using the power on/off function. In the Setup menu, select RTC tab.
In an installation where only the player is present or in a local network with external access, you must use a Modem/Router to create a gateway between the player and the Internet. Since the Modem/Router is configured with an IP gateway, you must declare this gateway to the VP100 so that it can communicate (configured in the Option menu).
Page 17
I.D. AL - VP100 Full HD 1080p video player - User manual The principle is as follows: When the IP address changes, the Modem sends this information to the DynDNS server. The service immediately carries out the modification in its database to point out the new address on the host name.
I.D. AL - VP100 Full HD 1080p video player - User manual Annex A - Specifications • Power supply : DC input : 12V DC • Consumption : - Sleep mode : 50 mA - Play mode : 600 mA Taille : Width : 142mm (1/3 19’’...
I.D. AL - VP100 Full HD 1080p video player - User manual Annex B - Functions Resolutions : • XGA - 1024 x 768 • WXGA - 1280 x 768 • SXGA - 1280 x 1024 • WXGA+ - 1440 x 900 •...
I.D. AL - VP100 Full HD 1080p video player - User manual Supported CODEC : MPEG layer 1 et 2 MP3 (MPEG layer 3), 44.1KHz / 48KHz - 32kbit/s up to 320kbit/s CBR/VBR AC3 (48kHz / 5 channels) WMA* 44.1KHz / 48KHz de 32kbit/s à 192kbit/s...
I.D. AL - VP100 Full HD 1080p video player - User manual Annexe D - Infra red remote control You can send command to player using an infra red remote control. Arrow Valid - OK Escape Volume + Page +/-...
Page 22
I.D. AL - VP100 Full HD 1080p video player - User manual http://www http://www .id-al.com .id-al.com http://www http://www http://www .id-al.com .id-al.com .id-al.com ® Waves System V 1.0 - 2010...
Need help?
Do you have a question about the VP100 and is the answer not in the manual?
Questions and answers