6.9
Program selection and option displays
Display for preset start time (SZV)
Run time display (RLA)
Information displays
These LEDs are permanently lit from switching the machine on by use of ON/OFF key until the
moment of actual program start. These LEDs will also be lit after reaching program stop until the
machine is switched off. The information LEDs will go dark during the entire program flow!
(Je nach Auflösung des Salzes kann es einige Zeit dauern, bis die LED erlischt).
When the option 3 in 1 has been selected (special tablet option), neither the salt LED nor the rinse-
aid LED is selected.
- 30 -