Technical Specifications; Service And Support - LENCO PA-1500 Instruction Manual

Technical specifications

Rated output power.....................................................100 Watt at THD=1%
Speakers.........................................................................2 x 10" @ 8 Ohm
High frequency driver.............................................................1.35" Tweeter
Frequency response................................................................20Hz-18kHz
MIC input sensitivity.........................................................................10mV
S/N ratio.......................................................................................≥75 dB
Talk over.......................................................................................≥-13dB
Master output..............................................................................1500mV
Power supply...............................................100V-120V/220V-240V~50/60Hz
(depends on distribution area, please refer to the back panel of the PA-1500)
Power consumption...................................................................≥ 150 Watt
Dimensions (W x D x H) mm....................................................340x340x900
NET Weight.................................................................................25.8KG

Service and support

Lenco offers service and warranty in accordance to European law, which means
that in case of repair (both in and outside the warranty), you should contact your
local dealer. Please note: It is not possible to send repairs to Lenco directly
Lenco helpdesk:
Germany
The Netherlands
Belgium
France
The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
In case your device needs repair our helpdesk will redirect you to your local
dealer.
0699- 5307177
0900-BELLENCO (0900-23553626)
02.620.01.15
0170480005
14