Introduction; Tx/Rx Led; Location Of The Tx / Rx Led - Icom IDAS IC-F3160 series Manual

TTX-F3160/F5060-V1.0

1 Introduction

Every IDAS transceiver has TX / RX LED indicators showing the radio status to the operator. This is
TM
common with ICOM's traditional analog FM radio or IDAS
systems. The basic indications are described in the following table.

TX/RX LED

Color
(Lights red)
(Lights green)
(turn OFF)
Location of the TX/RX LED: see red circle
The following are typical operations of IDAS
explained in subsequent sections.
 Registration
 Standing by
Receiving a call

Repeater busy

 Call initiation
 Call retry
4
The radio is transmitting.
While the subscriber radio receives a signal, the LED lights green.
However it does not mean that the radio is receiving an incoming call
from another operator.
The radio is in the standby mode.
radios configured for conventional or trunked
TM
Radio condition
multi site trunk radios. More detailed descriptions are
TM