Table of Contents
Advertisement
,
Problem
Even if an SO card is
formatted, it cannot be
used.
The indication
disappears.
The screen is frozen.
No operation can be
performed.
"ERROR OCCURRED.
PLEASE TURN UNIT OFF,
THEN TURN ON AGAIN."
is displayed.
When the SO card is
inserted in this unit, it is
not recognized.
When the SO card is
inserted in another
device, it is not
recognized.
96
LSQT1488
Check points
• Either this unit or the SO card may be damaged. Please
contact consumer support
(-+
111, 112).
• Use an SO card from 8 MB to 32 GB with this unit.
(-+
20)
• No operation can be performed on this unit when it is
connected to a PC.
• Turn off the power to this unit. If the power cannot be turned
off, remove the battery or AC adaptor and then reconnect it.
Turn on the power again. If normal operation is still not
restored, detach the power connected, and contact
consumer support.
(-+
111,112)
• The unit has automatically detected an error. Restart the
unit by turning off and on the power.
• The power will be turned off in about 1 minute if the power
is not turned off and on.
• Repair is needed if it is repeatedly displayed even if it is
restarted. Oetach the power connected, and contact
consumer support.
(-+
111, 112)
00
not attempt to repair
the unit by yourself.
• Use this unit to format SO cards. Please be aware that if an
SO card is formatted, then all the data recorded on the card
will be erased.
(-+
63)
• Check that the device is compatible with the capacity or
type of SO card (SO Memory Card/SOHC Memory Card)
that you inserted. Refer to the operating instructions of the
device for details.
Advertisement
Table of Contents
