Advertisement
Quick Links
Advertisement
Related Manuals for X-TREME Classic Line
Summary of Contents for X-TREME Classic Line
- Page 1 CLASSIC LINE User’s manual...
-
Page 2: Safety Instructions
Fig. 1 Classic Line systems, flying configuration Flying systems should only be assembled by a trained and expe- rienced crew, working in association with professional riggers. All Classic Line custers must be hung from secure and appropriately load rated rigging points. 2. General information... - Page 3 User’s manual Fig. 4 XTS subwoofer Fig. 2 XTH loudspeaker system The XTS is equipped with high dynamics 18” woofer mounted in Originally conceived for live concerts applications, the XTH element direct radiation in order to reproduce the frequency range between can equally well be used wherever the best reproduction of voice, 30 and 90 Hz.
- Page 4 Classic Line clusters can be created by placing different XTH speak- ers side by side, with angles between twenty and thirty degree on...
-
Page 5: System Configurations
9. Connectors The sound designer must know if the audience is standing or seat- The rear panel of Classic Line loudspeaker systems are fitted with ed, but the bottom of the cluster should - in any case - be higher two Neutrik Speakon NL4 connectors. - Page 6 Recommended crossover cut for subwoofers is 120 Hz. tion adjustement to reduce the effect of mid-low frequency build up X-Treme Classic Line systems combined with the appropriately inherent in the use of multiple arrayed enclosures. Examples:...
- Page 7 X-Treme Audio reserves the rights to change or modify products and specifications at any time without prior notice. X-Treme and the corresponding symbols, images and registered trademarks are of exclusive property of Sound Corporation group. © 2010 Sound Corporation group. All rights reserved.