X-Treme’s business unit (just think of the raised X-Treme logo). The new X-Treme monitors are not only fine looking, but the are also extremely steady, always literally “fastened down to the stage”. They...
User’s manual 3. DIRECTIVITY 4. GUIDELINES FOR USING PASSIVE MONITORS: STANDARDS AND PRECAUTIONS The chart above shows the amplitude of the output sound beam in re- lation to the frequency of the XTMON12 (passive), measured at Sound The Monitor Line is a series of passive and amplified products. The Corporation’s R&D laboratory in virtually anechoic conditions (calcu- passive versions have passive crossover filters with equalisation and lation of the impulse response and rejection of reflections).
RMS power cannot be exceeded for long periods. This is the job of the limiters contained 1.5 mm 17 m 34 m in the amplified versions of the Monitor Line and the X-Treme XTDP 2.0 mm 22 m 44 m external processors.
6.1 XT-NET management functions The X-Treme self-powered monitors are designed with a basic sound consisting of 2 internal presets that can be selected with the appropri- ate switch 1 on the back of the speaker.
6.2 Sensitivity the speakers connected to the network in two ways: The sensitivity of X-Treme active monitors is set at 4 dBu, fixing at 0 dB 1) downloading a .dfa file released by X-Treme Audio in order to effect the software volume and flat the EQs.