UL Keepsafer SSD Owner's Manual page 9

9 SIREN SPEAKER
# Makes unique sounds for burglary, fire and emergencies.
# Alarm siren stops automatically after five minutes.
# Sounds advisory tones to confirm keystrokes from the Console.
# Sounds mode selections tones.
# Sounds alarm memory tones.
# Beeps when Home Automation Output is activated.
# Optional external siren available for louder alarms (one or two may be used).
10 EMERGENCY BUTTON
# Pressing the [EMERGENCY] button for two seconds sounds the emergency siren.
# Can send an "emergency" message to a central monitoring station if the
# Works 24-hours, even when system is disarmed.
# IMPORTANT: For personal emergency use only. Not for use as a UL
11 TEST SENSORS LIGHT
# Lights every two weeks to remind you to test the system's sensors.
12 POWER LIGHT
# Glows when AC power is on.
# Dims when AC power is off and backup battery is installed.
# Blinks when the optional backup battery is low, recharging or missing.
# Off when AC power is off and no backup battery is installed (system
13 MODE BUTTONS
# Used to control the KEEPSAFER SSD Console.
# Off Mode disarms the system.
OFF
# Switching to Off Mode stops the alarm siren.
# Chime Mode disarms the system.
CHIME
# Switching to Chime Mode stops the alarm siren.
# Chime Mode is for monitoring doors and windows.
# Home Mode arms the perimeter sensors, but not the interior sensors.
HOME
# Away Mode arms the entire system.
AWAY
# Test Mode is for testing the system sensors.
TEST
# Hold the [TEST] button down to test all of the Console's indicator lights.
14 KEYPAD
# For entering your secret code (numerically or alphabetically).
# Secret code must be entered before switching to Off, Test or Learn Modes.
# Used when programming system options.
# Press [AUTO] key to activate Home Automation Output.
# Press the [ ∗ ] key to clear keypad if you press the wrong key.
optional Emergency Dialer is installed.
Listed Medical Alert System.
disabled).
 Multiple beeps sound and status lights flash if an alarm has occurred.
Multiple beeps mean caution. AN INTRUDER MAY STILL BE IN YOUR HOME.
 Multiple beeps sound and status lights flash if an alarm has occurred.
Multiple beeps mean caution. AN INTRUDER MAY STILL BE IN YOUR HOME.
 Use this mode as an "automatic door chime" when at home.
 Opening any protected door or window causes Console to "ding-dong".
 Use this mode when anyone is staying behind.
 Interior motion detectors and interior door sensors are not armed.
 Use this mode when leaving home.
 Door sensors set for delayed will have a delay that allows you to leave and enter
the premises without sounding the alarm.
 Entry Delay beeps warn you to disarm the system before the siren starts.
 All sensor status lights blink when the Test Mode is entered.
 Each sensor status light will stop blinking when its sensor is tested.
7