Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MK Diamond Products MK-APC
Summary of Contents for MK Diamond Products MK-APC
-
Page 1: Operating Instructions
MK-APC/W OWNERS MANUAL & OPERATING INSTRUCTIONS Revision 200 10.2010 Manual Part No. 168758 Caution: Read all safety and operating instructions before using this equipment. This owners manual MUST accompany the equipment at all times. MK Diamond Products, Inc. -
Page 2: Important Safety Instructions
INTRODUCTION The MK-APC/W walk-behind air saw is designed for simple operation and has been proven to be extremely useful and versatile. A 12" to 20" diameter diamond blade may be mounted on the saw if it is rated and approved for operation at 3,300 RPM. READ, AND CAREFULLY FOLLOW, THE OPERATING AND SAFETY INSTRUCTIONS OF THIS OPERATING AND SAFETY INSTRUCTION MANUAL BEFORE USING THIS PRODUCT. - Page 3 E. ASSEMBLY INSTRUCTIONS: For shipping convenience, your saw (MK-APC/W) may have been shipped without attaching of handle assembly, jack assembly and pointer. 1. INSTALL THE JACK ASSEMBLY: Release the 2 3/4" bolt on the jack bracket from the saw chassis and the center bolt on the handle quadrant. Rotate the crank on the jack assembly counterclockwise so that the two pivot tubes line up with the nut on the jack bracket and the holes of the center bolt.
- Page 4 #5-PF, 1/2" NPT 02-75504 WATER TANK KIT 8 gallon tank attaches to MK-APC/W for dust suppression. Includes mounting frame and brackets. 05-78010 3,300 RPM Air Motor 02-76003 Items in bold below (bearing sleeve, bearing and large end plate) can be purchased as an upgrade kit (part # 02-70116A) for saw models prior to serial number UU-0981.
Need help?
Do you have a question about the MK-APC and is the answer not in the manual?
Questions and answers