Advertisement
O R E N Z
3
SERIES
DEEPMAX com
R
Operating manual
Lorenz Detecting Systems GmbH
Metal Detectors for professional, industrial and
security applications
Röpkestrasse 12
D - 30173 Hannover/Germany
Tel : +49 (0)511 5510670
Fax : +49 (0)511 5510671
mail@metaldetectors.de
www.metaldetectors.de
www.deepmax.com
© 01/2007/100 LORENZ DETECTING SYSTEMS • GERMANY
Advertisement
Table of Contents
Related Manuals for Lorenz X3
Summary of Contents for Lorenz X3
- Page 1 O R E N Z SERIES DEEPMAX com Operating manual Lorenz Detecting Systems GmbH Metal Detectors for professional, industrial and security applications Röpkestrasse 12 D - 30173 Hannover/Germany Tel : +49 (0)511 5510670 Fax : +49 (0)511 5510671 mail@metaldetectors.de www.metaldetectors.de www.deepmax.com ©...
-
Page 2: Declaration Of Conformity
The following metal detector LORENZ DEEPMAX X3 Correspond to the following EC requirements: EC-EMC-directive version 89/336/EEC The LORENZ DEEPMAX X3 series are found to meet the specification requirements detailed, when tested to the customers/ specification requirements. Compatible norms are in particular Test Specifications &... -
Page 3: Safety Information
The LORENZ detector model offers a number of features which are new DEEPMAX X3 is the result of many years of research and for a pulse metal detector. Quality electronics and very development. A lot of efforts have been put into making... - Page 4 SERIES DEEPMAX com 2. Function The LORENZ DEEPMAX X3 is based on the non- motion; an audible signal either by headphones or built-in Pulse GBS (Pulse Ground Balancing System). Short and loudspeaker when a metal is in the near of the field of intensive magnetic pulses are emitted by means of a the search coil.
- Page 5 Saltwater, conjunction with small coils the LORENZ DEEPMAX most types of ground or temperature changes will X3 is a great tool when searching for small objects only slightly affect the detection range of the deep in the ground.
-
Page 6: Controls On The Front Panel
Position 3 The LORENZ DEEPMAX X3 offers in this position less SENS button sensitivity than in position 1 or 2. In most cases very... - Page 7 Each time the battery is disconnected, selected simultaneously and the channel producing the the LORENZ DEEPMAX X3 has to be turned on with the stronger signal will be indicated by the way of audio or POWER button again.
- Page 8 LORENZ DEEPMAX BATTERY icon X3 has to be turned off when this sound appears to avoid damage from the batteries. The battery condition will be displayed on the bar graph with 5 bars located in the middle of the display.
-
Page 9: Operating Procedures
Set the POWER button Than simply release the button and try to keep the to turn the LORENZ DEEPMAX X3 on. Press again for distance between the coil and the ground very “OFF”. At switch ON the detector runs through a display constant when searching. - Page 10 (10 to 60 cm) over be recalled every time the ZERO button is operated. the ground to ignore magnetic mineralised ground As the LORENZ DEEPMAX X3 offers it's highest or small unwanted metal objects. Those coils should sensitivity with correctly tuned electronics, one should...
- Page 11 (10 to 50 cm) depending Coins and nails and very small pieces of metal will on the coil and the LORENZ DEEPMAX X3 can simply cause two indications when passing them with a be tuned to the ground conditions while holding the frame mounted search coil (1 m x 1m) for example.
- Page 12 Afterwards the coil can be raised in the air. The controls in order to cancel out signals from magnetic LORENZ DEEPMAX X3 should now be silent even if soils or single stones with high iron oxide contents. the coil is lowered to the ground again. If still...
- Page 13 As LORENZ DEEPMAX X3 are based on different working soon as a certain intensity of the audible signal is principles. The time delay reading is static therefore...
- Page 14 The TIME DELAY target classification of the LORENZ necessary to tune the detector to the ground first as DEEPMAX X3 will work with all available coils. It is capable described before. to identify deeply buried big metal objects and small objects near the surface.
- Page 15 It is also necessary not to wear any gold coin with 25mm diameter make this coil interesting clothes with metal when operating the LORENZ DEEPMAX for a lot of different search and locating purposes. X3 to avoid false signals.
- Page 16 2m x 2m frame coil metal objects only. The LORENZ DEEPMAX X3 is specially sensitive to many non-ferrous metal objects The universal cable coil has to be laid to a single turn no matter which coil is connected.
- Page 17 LORENZ DEEPMAX X3. The high sensitivity lines or the ground itself. for large and deeply burried metal objects and the...
- Page 18 O R E N Z SERIES DEEPMAX com The sensitivity of this double frame coil is coils; four black mounting devices 0,5m length; almost the same as with the 1m x 1m single one adapter cable with three connectors; two loop frame coil.
-
Page 19: Battery / Recharger
Note: Do never forget to turn off the LORENZ DEEPMAX electronics will automatically change to a trickle charge X3 when it is not in use or when planing to store it. mode when the battery is full. The battery is therefore Disconnect all plugs from the control box when protected and can't be overcharged. - Page 20 The LORENZ accepted in respect of the high sensitivity still offered DEEPMAX X3 has to be tuned and the right coil has with those particular coils. In some cases interference to be chosen first before starting to identify metal can be so intensive that it is simply impossible to objects.
-
Page 21: Maintenance & Service
Do switch off the LORENZ or extreme temperature changes. All search coils DEEPMAX X3 when the beep alarm sound comes on. available for the LORENZ DEEPMAX X3 are waterproof. Disregarding this can damage the built- in battery. - Page 22 O R E N Z SERIES DEEPMAX com 11. Detection depths I 26cm- 35cm 45cm- 1m double frame 1,5m double frame Used Searchcoil coil DD-coil coil square square Metal object Gold nugget d = 5 mm 22 cm 23 cm (23 cm) X Silver coin d = 1,3 cm...
- Page 23 O R E N Z SERIES DEEPMAX com 11.1 Detection depths I I 26cm- 35cm 45cm- 1m double frame 1,5m double frame Used Searchcoil coil DD-coil coil square square Metal object Gold nugget d = 5 mm 15 cm 15 cm Silver coin d = 1,3 cm 22 cm...
-
Page 24: Specifications
After recording or collecting field data the Surfer 8 Software easily and accurately transforms the data with the Lorenz Deepmax X3, additional Hard- and stored on the SD-Memory card into colour, contour, Software is necessary. A very sophisticated data logger... - Page 25 Three delay channels will in use to achieve best results. Recording field data with the Lorenz Deepmax X3 datalogger and Surfer Software At the end of each track stop the same and wait approximately three seconds until a low beep sound appears...
- Page 26 9. To start the first track, go to the starting point where X an error with the software! 15. The Deepmax X3 can now be turned off and the SD and Y meet. 10. Press the same ZERO button with the arrow sign and...
- Page 27 25. A Surfer – Plot 1 and a Surfer - Plot 2 window will come the GROUND or DELAY buttons. 18. To turn off the audio from the Lorenz Deepmax X3 on after approximately one minute time when the computer...
- Page 28 • Signals with a fast decay of the eddy current like foils, on the display of the Lorenz Deepmax X3. Neutral ground thin plates small nails (Target classification Number 35 or will cause a purple indication.
-
Page 29: Important Note
O R E N Z SERIES DEEPMAX com 12.1 Important Note ! The following steps are only necessary during the 1.) Install the Surfer8 software: installation procedure. Place the Surfer8 CD in the CD-ROM drive and close it. The installation program will start. Follow the instructions A computer with Windows XP , a CD-ROM drive and a and don’t change the default installation path SD-Memorycard slot would be essential when doing... - Page 30 O R E N Z SERIES DEEPMAX com 5.) Left click on the “Start” button and click “Programs” -> “Golden Software Surfer8” -> “Scripter”. Scripter will start. 6.) Click on “File” at the Scripter menu bar and then on “Open”:...
- Page 31 O R E N Z SERIES DEEPMAX com Click on “Desktop”: and then doubleclick on “LorenzScript.bas”.
- Page 32 O R E N Z SERIES DEEPMAX com 7.) Now click on “Script” at the menu bar and then “Run”: 8.) Now, the script will start and opens a window, where you can navigate to the location ( see step 3.) of the Memory Card Reader in your PC .
- Page 33 O R E N Z SERIES DEEPMAX com 9.) In a final step leave the default values “Track length” and “Track width” unchanged, simply press “Ok”: Now the PC will work a little while, then the following result will appear: The installation procedure is complet ! Now, close Surfer and Scripter.
- Page 34 O R E N Z SERIES DEEPMAX com Instructions to use installed LorenzScript 1.) Place the SD – Memory card in the card reader. A window similar to this will appear: Notice that the drive letter of your Card Reader is in this case “G”. Close this Explorer window.
- Page 35 O R E N Z SERIES DEEPMAX com 3.) Now the Scripter-window with the loaded script file “LorenzScript.bas” will appear. The program “Scripter” can execute the scriptfile and proceed the stored data on the Memory card. To start the script file, click with the left mouse button at “Script” on the menu bar and then click with the left mouse button at “Run”.
-
Page 36: Optional Accessories
The produced graphics are different from this demo field, they depend on the data of your own field, please refer to the examples in the instruction manual mentioned before. Specifications Deepmax X3 with six channel Datalogger: l Six channel data acquisition: three Delay channels, two Ground channels, one Target Classification channel...