Table of Contents
Advertisement
PAD=1:V CHG=MOM |
I VALUE key
(MAIN-SUB voice changeover)
V=01
:
VEL=127
|
I VALUE key
"
(Drum sound)-•-: -,/."-•'
PTN START/ST'OP*^*]
VALUE key
(Starting'stopping rhylhrnpaltern playback)
PTN
CONT/STOP
VALUE key
PTN
NO.
(Pause during rhythm pattern playback)
UP
VALUE key
PTN
NO.
(Switching to the next pattern number)
DOWN
I
| VALUE key
SET
NO.
(Switching to Ihe previous patlern nmn6ef>
UP
VALUE key
SET
NO.
(Switching to the next setting number)
DOWN
I VALUE key
(Switching lo tne previous setting number;
EDIT ON/OFF
|
(Turning edit functions on a-vj off)
MAIN-SUB Voice Changeover
This function causes the foot switch to alternate a drum
pad between the MAIN and SUB voice settings.
FOOT
Function
PAD=1:V
CHG=MOM
T Pad number
T Mode
(T)Select a pad number, using the CURSOR control and
VALUE keys.
|PAD=l:V CHG=MOM I
t
Use the VALUE keys to select
a value between 1 and 7.
CD Move the cursor to the mode field, then select the
MOM or ALT paramter, using the VALUE keys.
|PAD=1:V CHG=MOM I
Use the VALUE keys to switch the parameters. |
ALT
MOM: Momentary
This parameter enables the SUB voice setting
while the foot switch stays on.
ALT:
Alternate
This parameter switches between the MAIN and
SUB voice settings each time the foot switch is
pressed.
Drum Sound
This function allows the foot switch to trigger a sound
generator, which usually generates sounds on receiving
drum pad input. The DRM-1
will produce drum pad
sounds each time the foot switch is depressed.
FOOT
Func tion
V=00
:
VEL=127
t Voice number
T Velocity
)Select a voice number, using the CURSOR control
and VALUE keys.
V=00
VEL=127
t
1 5
Use the VALUE keys to select
a value between 00 and 15.
(I) Move the cursor to the velocity field, then specify
velocity, using the VALUE keys.
V = 0
VEL=l22
Use the VALUE keys to select
a value between 000 and 127.
I
DOO
PTN START/STOP
This function allows a foot switch to control rhythm
pattern
playback.
Depressing the foot switch starts
playback; depressing it a second time stops the playback
and resets the location count.
If the rhythm pattern contains a repeat, the playback
will continue in an endless loop until stopped by the
user.
PTN CONT/STOP
This function allows the foot switch to control rhythm
pattern playback. Depressing the foot switch starts play
back; depressing it a second time stops the playback, but
does not reset the location count. Playback will continue
from the last location reached the next time it is started.
If the rhythm pattern contains a repeat, the playback
will continue in an endless loop until stopped by the
user.
PTN NO. UP
This function allows the foot switch to advance the
pattern number by one each time the switch is de
pressed.
PTN NO. DOWN
This function allows the foot switch to access the pre
vious pattern number each time the switch is depressed.
SET NO. UP
This function allows the foot switch to advance the set
ting number by one each time the switch is depressed.
SET NO. DOWN
This function allows a foot switch to access the previous
setting number each time the switch is depressed.
EDIT ON/OFF
This function allows the foot switch to start or stop
deletion of rhythm pattern data on pressing the switch.
See pages 16 - 17 for the ERASE and DELETE func
tions of the PATTERN group.
In addition to the A (YES) and ▼(NO) keys on the
VALUE keypad, the EDIT ON/OFF function allows the
foot switch to start and stop the ERASE or DELETE
function, whichever is in use. Depressing the foot switch
starts the ERASE or DELETE function from the current
playback
location; depressing it a second time stops
the function.
23
Advertisement
Table of Contents
