Table of Contents
Advertisement
1.
Introduction
Congratulations! With the CDP2000-BK you have purchased
a master-class digital piano which is on a par with its acoustic
counterpart in terms of sound and feel. The keyboard features 88
weighted keys with hammer action, in combination with the RSM
stereo sound generator this gives you an unparalleled playing
experience. High-quality modulation and room effects as well as a
2 x 40-Watt loudspeaker system produce a very natural and spa-
cious sound. The 2-track sequencer for recording and practicing
also includes a metronome and adds the finishing touch to the
overall concept.
Before you get started
1.1
1.1.1
Shipment
Your CDP2000-BK was carefully packed at the factory, and the
packaging was designed to protect the unit from rough handling.
Nevertheless, we recommend that you carefully examine the
packaging and its contents for any signs of physical damage that
may have occurred during transit.
+
If the unit is damaged, please do NOT return it to
BEHRINGER. Instead, notify your dealer and the ship-
ping company immediately. Otherwise, claims for dam-
age or replacement may not be honored.
+
Always use the original packing carton to prevent dam-
age during storage or transport.
Make sure that no children are left unsupervised with
+
the CDP2000-BK or its packaging.
+
Please ensure proper disposal of all packing materi-
als.
1.1.2
Initial operation
Be sure that there is enough space around the unit for cooling
and please do not place the CDP2000-BK on high temperature
devices such as radiators etc. to avoid overheating.
+
Blown fuses must be replaced by fuses of the same
type and rating! Please refer to the "SPECIFICATIONS"
for details.
The mains connection of the CDP2000-BK is made by using the
enclosed mains cable and a standard IEC receptacle. It meets all
of the international safety certification requirements.
+
Please make sure that all units have a proper ground
connection. For your own safety, never remove or dis-
able the ground conductor from the unit or of the AC
power cord.
+
The CDP2000-BK is an electronic piano. Unlike an acous-
tic piano, this instrument does not need to be tuned.
+
The sound quality may diminish within the range of pow-
erful broadcasting stations and high-frequency sources.
Increase the distance between the transmitter and the
device and use shielded cables for all connections.
1.1.3
Online registration
Please do remember to register your new BEHRINGER equip-
ment right after your purchase by visiting www.behringer.com
(alternatively www.behringer.de) and kindly read the terms and
conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original equip-
ment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the
CONCERT CDP2000-BK
distributor nearest you. A list of distributors can be found in the
support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us process
your repair claims quicker and more efficiently.
Thank you for your cooperation!
The CDP2000-BK is a digital, i.e. electronic, piano. Therefore,
mains power is required to operate the instrument and it has to be
switched on or off. The following section describes how to connect
the unit to the mains.
The POWER switch to the left of the keyboard must be
+
in the "off" position when you connect the unit to the
mains.
FUSE HOLDER / IEC RECEPTACLE
The CDP2000-BK is connected to the mains using a standard IEC
receptacle. All required safety regulations have been adhered to. A
matching power cable is included with the unit. Blown fuses must
be replaced with a fuse of the same type and rating.
1)
Connect the power cable supplied with the unit to the con-
nector provided on the underside of the instrument and to
a wall socket
2)
Press the POWER switch to the left of the keyboard to switch
the instrument on or off. The LED on the front panel lights up
when the CDP2000-BK is ready for operation.
+
After playing, switch off the unit with the POWER switch.
The POWER LED on the front panel will go out. Please
note: Merely switching the unit off does not mean that
it is fully disconnected from the mains. If you do not
plan to use your piano for a prolonged period of time,
please disconnect it from the mains by unplugging the
power cable from the wall outlet.
2.2
The volume of the built-in loudspeakers and headphones can be
adjusted as follows:
1)
Set the MAIN VOLUME control to mid-travel position, be-
tween MIN and MAX.
2)
Adjust the volume as desired by moving the control to the
right (up) or left (down).
+
The CDP2000-BK is capable of producing extreme vol-
umes. Please bear in mind that high sound pressures
not only temporarily affect your sense of hearing, but
can also cause permanent damage. Be careful to select
a suitable volume at all times, particularly when you are
playing with headphones.
Quick Start
2.
Quick Start
Power on/off
2.1
Adjusting the volume
Caution
5
Hide quick links:
Advertisement
Table of Contents
