Loading And Advancing Film; Loading Film - Minolta X-700 Instruction Manual

A handy ISO (DIN-ASA) table,
w i t h a surrounding memo holder
for keeping the film-box end as a
reminder of the film
number of exposures, is located on
the camera back.

LOADING AND ADVANCING FILM

Loading film

Before opening the camera back,
confirm that there is no film inside
that could be damaged by light if
the back is opened, by checking
that:
• No red is visible in the Safe Load
Signal (see p. 20).
• Rewind
rotated
without pushing rewind button.
Since the frame counter advances
each time the shutter is cocked
even if no film is inside, the camera
type and
may be empty even when the index
does not point to " S " .
crank can be freely
clockwise many times
Prior to loading f i l m , set the film
speed (see previous page) and turn
the main switch on (p. 13).
CAUTIONS
• Film should be handled and load-
ed in subdued light
shaded from direct sunlight by your
body.
• Do not touch any parts or areas
shown in blue below.
- at least
17