Advertisement
Inserting the CyberPen in the Cyberwell
In order for the CyberPen to upload the collected bar code
data to the PC, the pen must be properly inserted in the
Cyberwell as illustrated:
Uploading Bar Code Data
To upload the collected bar code data to the PC:
1.
Ensure the PC program is ready to receive data.
2.
Press the scan button once and immediately insert the
pen into the Cyberwell.
The pen beeps once to indicate a connection has been
made with the PC and then stored bar codes can be
transferred to your PC. How that transfer takes place is
application-dependent. Do not remove the pen from
the Cyberwell until the upload is complete. If the pen is
removed from the well during the upload or if an error
occurs during upload, three beeps sound to indicate
interrupted communication. If this occurs, ensure the
PC is ready to receive data, press the scan button once
and reinsert the pen in the well to start the upload
again.
6
Advertisement
