Advertisement
Setting Up the Cyberwell
Setting up the Cyberwell requires connecting the Cyberwell
cable to the serial port on the back of your PC.
1.
Insert the Cyberwell cable into the the COM1 port on
the back of your PC. If the COM1 port is in use, use
the COM2 port.
2.
Tighten the connector's screws to ensure proper con-
nection.
Adjusting the Beeper Volume
The CyberPen's beeper has four volume levels: High,
Medium, Low, and Off. To change the beeper volume, press
the scan button twice quickly. Upon pressing the scan button
twice, you should hear a sample of the newly selected vol-
ume.
4
Advertisement
