Removing Face, Thread Cutter , Bobbin Winding And Covers - Singer Futura XL-550 Service Manual

Removing face, thread cutter , bobbin winding and covers

1. Remove screw cap (A) with and aid of needle
2. Remove screw (B) from the left side of the Face cover.
C
3. Turn the machine around and remove the screw (c)
that holds face and back cover together and remove
B
the face cover
A
4. Remove screw cap (D) with and aid of needle
F
5. Remove the screw (E),
then remove the Thread cutter cover (F).
D
E
G
6. Remove the screw (G) that holds the bobbin winding latch.
7. Remove the bobbin winding latch (H).
H
8. Remove the screw (I) for the bobbin winding cover
9. Remove the bobbin winding cover (J) by push on the cover at
marked area (K) to realese the hooks.
J
H I
K
J
K
10. Remove the two screws (L) then remove the Switch cover.
M
L
34 Singer Furura XL-550