Back Panel Descriptions - Sony CDR-W33 Operating Instructions Manual

@∞ MUSIC SYNC button
Press to start Music Synchro-recording.
@§ MENU/NO button
Use to select the Setup menu.
@¶ AMS control
Turn to locate tracks and select the input
characters.
@• YES button
Confirm the Setup menu selection.
@ª NAME button
Press to switch to name input mode.
#º CHAR button
Select the type of character to be input uppercase
letters, lowercase letters and number.

Back Panel Descriptions

1 2 3 45
1 Analog input terminal
Connect to the analog output terminal of a mixer or
playback device.
2 Analog output terminal
Connect to the analog input terminal of a mixer,
amplifier or recorder.
3 Digital (optical) input terminal
Connect to the optical digital output terminal of a
digital device. Compatible with consumer digital
audio interface format.
4 Digital (optical) output terminal
Connect to the optical digital input terminal of a
digital device.
6
Location and Function of Parts
#¡ CLEAR button
Clear the characters and program that has been
entered.
#™ CHECK button
Displays the program details.
#£ SBM/LIMITER/EQ control
Press to turn ON and OFF DSP (Digital Signal
Processing) effects.
#¢ INPUT switch
Select sound source to be input to the CD recorder.
#∞ REC LEVEL control
Use to adjust the analog input sound level.
#§ PHONE LEVEL control
Use to adjust the volume of the headphones.
#¶ PHONES jack
Connect headphones to this jack.
7
5 Digital (coaxial) input terminal
Connect to the coaxial digital output terminal of a
digital device. Compatible with consumer digital
audio interface format.
6 Digital (coaxial) output terminal
Connect to the coaxial digital input terminal of a
digital device.
7 Control-S input terminal
Connect to the supplied remote controller or
another control device.
8 Power supply cable
Connect to the power outlet.
9 Voltage selector (Except for the US models)
Select 120V or 230V according to the local power
line voltage. (Refer to page 2)
VOLTAGE
SELECTOR
120V 230V
9
8
7