Connecting Machine To Power Source - Singer 1408 Instruction Manual

Connecting Machine to Power Source

Connect the machine to a power source as illustrated. (1)
This appliance is equipped with a polarized plug which must
be used with the appropriate polarized outlet. (2)
Attention:
Unplug power cord when machine is not in use.
Foot control
The foot control pedal regulates the sewing speed. (3)
Attention:
Consult a qualified electrician if in doubt of how to connect
machine to power source.
Unplug power cord when machine is not in use.
The foot control must be used with the appliance by FC-
1902 KD-1902 (110-120V area)/
(220-240V area) manufactured by ZHEJIANG FOUNDER
MOTOR CORPORATION LTD. (China)
4C-316B (110-120V area)/
manufactured by Wakaho Electric Ind. Co., Ltd. (Vietnam)
Sewing light
Press main switch (A) to " l " for power and light.
IMPORTANT NOTICE
For appliance with a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If
it does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way.
FC-2902 KD-2902
4C-326G (230V area)
1
Polarized attachment plug
Conductor intended
to be grounded
2
4
A
3