Access Points - Nokia N97 mini User Manual

To view advanced settings, select
settings. Changing the advanced settings for the WLAN is
not recommended.

Access points

Create a new access point
Select Menu Settings
>
Destinations.
You may receive access point settings in a message from
a service provider. Some or all access points may be preset
for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
When you open one of the access point groups (
, ), you can see the access point types:
indicates a protected access point
indicates a packet data access point
indicates a wireless LAN (WLAN) access point
Tip: You can create internet access points in a WLAN with
the WLAN wizard.
To create a new access point, select
The device asks to check for available connections. After
the search, connections that are already available are
shown and can be shared by a new access point.
If you skip this step, you are asked to select a connection
method and to define the settings needed.
Options Advanced
>
and Connectivity
>
Access point.
To edit the settings of an access point, open one of the
access point groups, and select an access point. Follow the
instructions from your service provider.
Connection name — Enter a name for the connection.
Data bearer — Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined
empty, unless your service provider has instructed
otherwise.
To use a data connection, your service provider must
support this feature, and if necessary, activate it for your
SIM card.
, ,
Create access point groups
Select Menu
>
Destinations.
Some applications allow you to use access point groups
for network connections.
To avoid selecting a single access point every time the
device makes a network connection, you can create a
group that contains various access points to connect to
that network and define the order in which the access
points are used.
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group, and
use the group for browsing the web. If you give WLAN the
or with a red *. Other fields can be left
Settings and Connectivity
>
71