Important Safety Information - ThinkFlood RedEye Pro Quick Start Manual

Important Safety Information

Read all safety information and operating instructions
before using RedEye Pro to avoid injury. For detailed
operating instructions, including any updates to the safety
and regulatory information, see the RedEye User Manual
at: thinkflood.com/redeye/manual/
Important Safety Information
Handling Your RedEye Pro Device
Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate, paint, or insert foreign objects into the RedEye
Pro device.
Avoiding Water and Wet Locations
Do not use your RedEye Pro outdoors, or near washbasins or other wet
locations. Take care not to spill any food or liquid on the RedEye Pro
device. In case RedEye Pro gets wet, unplug all cables before cleaning,
and allow it to dry thoroughly before turning it on again. Do not attempt
to dry your RedEye Pro device with an external heat source, such as a
microwave oven or hair dryer.
Repairing Your RedEye Pro
Never attempt to repair or modify the RedEye Pro device yourself. The
RedEye Pro device does not contain any user-serviceable parts. If
your RedEye Pro device has been submerged in water, punctured, or
subjected to a severe fall, return it to ThinkFlood for examination before
using. For service information, go to thinkflood.com/support.
Powering Your RedEye Pro
Do not connect or disconnect the RedEye Pro device power cable with
wet hands. Do not use any power cable other than the included power
cable. Plug the RedEye Pro power cable into the power jack on the
back of the device, and then plug it into a wall socket.