Access Via Web Browser - ThinkFlood RedEye Pro Quick Start Manual

Access via web browser

Your RedEye Pro runs a built-in web server, which allows you to
configure it from any personal computer running a web browser.
To access your RedEye Pro's home page, you will need a
network connection to it.
The easiest way to establish a network connection is through
one of RedEye Pro's two Ethernet ports. If you have an Ethernet
network with a DHCP server, you can plug RedEye Pro directly
into the network and then use the IP address assigned by your
DHCP server to access RedEye Pro's home page.
If you do not have an Ethernet network with DHCP, you can
plug RedEye Pro into an open Ethernet port on your desktop
or laptop computer. In this case, RedEye Pro will self-assign an
IP address of 169.254.254.254. (NOTE: if your computer does
not have an active Internet connection, the RedEye home page
will not display the icons shown below. The homepage will still
function normally, however.)