Atv (Analogue)/Dtv/Radio Buttons; Switching The Analogue Audio Format - Sharp Aquos LC-60LE631X Operation Manual

ATV (Analogue)/DTV/RADIO buttons

Use the following buttons on the remote control to
operate the menu.
ATV: Press to switch to ATV mode. After switching from
DTV, radio or external input mode to ATV mode, the TV
jumps to the most recently viewed ATV channel.
DTV: Press to switch to DTV mode. After switching from
ATV, radio or external input mode to DTV mode, the TV
jumps to the most recently viewed DTV channel.
RADIO: Press to switch to radio mode. After switching
from DTV, ATV or external input mode to radio mode, the
TV jumps to the most recently tuned radio channel.
When you watch the TV for the first time
When the TV powers on for the first time after purchase,
perform the auto installation.
ATV (Analogue TV)
You can run the auto installation to set channels
automatically.
1
To watch the analogue TV, select "Auto
installation" from Setup menu. (See page 10)
2
After setting the channels, you can select a
channel using CH r/s or 0 – 9 on the remote
control unit. (See page 6)
20
DTV
When the TV accesses to DTV mode for the first time,
you need to run the auto search. To scan all available
services in your area, follow the procedures below.
1
To watch DTV broadcasts, select "DTV" from auto
installation menu. (See page 10)
2
After setting the channels, you can select a
channel using CH r/s or 0 – 9 on the remote
control unit. (See page 6)
Switching the analogue audio
format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches between
NICAM STEREO and MONO.
Stereo mode
BBC1
01
ATV
PAL B/G
NICAM STEREO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and MONO.
Bilingual mode
BBC1
01
ATV
PAL B/G
NICAM CH A
BBC1
01
ATV
PAL B/G
MONO
When receiving a monaural signal
Each time you press MPX, the mode switches between
NICAM MONO and MONO.
Monaural mode
BBC1
01
ATV
PAL B/G
NICAM MONO
BBC1
01
ATV
PAL B/G
MONO
BBC1
01
ATV
PAL B/G
NICAM CH B
BBC1
01
ATV
PAL B/G
NICAM CH AB
BBC1
01
ATV
PAL B/G
MONO