Running A Maintenance Program; Run Maintenance Program Submenu - AlphaPC 164LX User Manual

7.1.7 Running a Maintenance Program

You can run maintenance programs such as RAID and other configuration utilities directly
from the AlphaBIOS utility menu.
To run a maintenance program:
1. Start AlphaBIOS Setup, select Utilities, select Run Maintenance Program from
the submenu shown in Figure 7–3, and press Enter.
Figure 7–3 Run Maintenance Program Submenu
Display System Configuration
Upgrade AlphaBIOS
Hard Disk Setup...
CMOS Setup...
Install Windows NT
Utilities
About AlphaBIOS
Press ENTER to run an AlphaBIOS maintenance program.
ESC=Exit
2. In the Run Maintenance Program dialog box, type the name of the program to be
run at the Program Name prompt, as shown in Figure 7–4. Then tab to the Loca-
tion listbox and select the hard-disk partition, floppy diskette, or CD-ROM drive
from which to run the program.
3. Press Enter to execute the program.
AlphaBIOS Setup
OS Selection Setup
Run Maintenance Program...
Run Maintenance Pro-
AlphaBIOS
F1=Help
Configuring for Windows NT
7–7