Cub Cadet Commercial S6031 Tank S Operator's Manual page 34

Adjusting the Front Skirt
The front skirt can be raised or lowered depending on the
mowing conditions. The skirt has three settings; low, medium
and high. See the table on page 23 in the Operation section for
more information. Raise the skirt to cut higher volumes of grass
and lower the skirt to increase grass lift for precision cutting.
1. Loosen — but do not remove — the nuts securing the skirt,
place in the proper position and then retighten the nut.
See Fig. 6-9.
Front Skirts
2. Repeat on the other side and be sure that both skirts are in
the same position.
34 s 6— M
ectiOn aintenance
Flange Lock Nuts
Figure 6-9
& a
djustMents
Removing/Installing the Inner Baffle
The inner flow-control baffle can be removed depending on
the mowing conditions. The baffle controls discharge and can
be removed for high-volume grasses and installed for precision
cutting.
1. Remove the carriage bolts and flange lock nuts that secure
the baffle to the deck to mow high-volume grasses. See
Fig. 6-10.
Carriage Bolts
Figure 6-10
2. Re-install the inner baffle for precision cutting and make
sure the baffle is properly secured.
Inner Baffle
Flange
Lock
Nuts