Table of Contents
Advertisement
RECORDING CONVERSATIONS
IMAGEN enables you to record your telephone conversa-
tions. You must have the system administrator program a
designated [CALL RECORD] button to operate on your
telephone set. This feature is not available on single line
telephones.
A conversation you have recorded is stored in your mailbox
as a new message. You can, therefore, transfer or copy the
recorded conversation to another mailbox or mailbox
group. (See the section titled Copying or transferring a
message to another mailbox ).
Unless your system is programmed otherwise, the initial
recording time allotted to each call is 15 minutes. You can,
however, add additional recording time, for up to a total of
30 minutes.
To record a conversation
1. While engaged in a conversation,
press [CALL RECORD]; the button lights up or an
arrowhead appears next to it.
2. Dial [4] to extend the recording time, if necessary.
3. Press [CALL RECORD] again to stop the recording;
the light goes off or the arrowhead disappears.
It is required that you inform the second party that the
conversation is being recorded.
Digital and analog telephone sets and SLT
39
Advertisement
Table of Contents
