Western Digital Media Player User Manual page 183

You will be prompted to select the TV standard applicable to your device. This
setting depends on your regional location.
Options include:
NTSC – United States, Canada, Japan, Mexico, the Philippines, South Korea,
and Taiwan.
PAL – Europe, Greenland, parts of Africa and South America, the Mideast,
China, India, Australia, and Indonesia
Select a regional TV standard then press OK.
HDMI
When using an HDMI cable (if your TV supports HDMI resolution), select HDMI in the
Video output screen.
You will be prompted to select the applicable HDMI video resolution (set to Auto, or
from 480p to 1080p). Select display resolution then press OK.
Note: The further down the list the setting, the higher the resolution and clearer the picture.
After setting resolution, you are prompted to select color space (set to Auto, or RGB
High, RGB Low, or YCbCr). Select color space then press OK.
Aspect Ratio
Use this menu to select the way videos are displayed. Options include:
Normal (4:3)
Widescreen (16:9)
The media player's default setting is Widescreen . Make sure your TV can support
widescreen resolution, or this default setting can result in a distorted video display.
Audio Output
Use this menu to select the audio output mode.
WD TV Media Player
SETUP AND ADVANCED FEATURES – 178
User Manual