Assigning Antenna Channels
Use the up/down buttons to select a profile.
●
Available channels will be displayed in the left available box.
●
Channels that have been added will be in the right selected box.
●
To move individual channels highlight a channel and press enter.
●
The box to the left of the channel will display an "x" when selected.
●
Once the desired channels have been selected, use the add or remove button to move the
●
channels accordingly.
All channels may be added or removed at once with the corresponding button.
●
Press the blue button to save the changes.
●
NOTE: If satellite channels were scanned prior to creating a profile all channels will be added
to the profile by default. If the profile is created prior to scanning, and auto assign channels was
not selected, the channels have to be added manually. Also, Rescanning satellite channels will
not add them automatically to the profiles if auto assign channels was not selected. The newly
scanned channels have to be added manually.
PAGE 58
TOC
BACK TO