Auto Hold - Hyundai GENESIS Quick Reference Manual

Hide thumbs Also See for GENESIS:
Table of Contents

Advertisement

FEATURES AND CONTROLS
SUNROOF
With ignition switch on
INTERIOR LIGHTS
10
To open
Press switch rearward. Press switch
rearward past the detent to open
completely.
To close
Press switch forward. Press switch
forward past the detent to close
completely.
To tilt
Push or pull switch up or down.
Push the switch to turn the map lamp
on or off.
DOOR
Lights will turn on when any door is
open except trunk.
OFF
Push the switch to turn the map lamp
and room lamp on or off.
HYUNDAI
AUTO
HOLD
HOME LINK WIRELESS CONTROL
Sensor
Indicator
Standard Programming
To train most devices, follow these instructions:
1. For first-time programming, press and hold the two outside buttons,
HomeLink
Channel 1 and Channel 3 Buttons, until the indicator light
®
begins to flash (after 20 seconds). Release both buttons. Do not hold the
buttons for longer than 30 seconds.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm) away
from the HomeLink
3. Simultaneously press and hold both the HomeLink
transmitter button. DO NOT release the buttons until step 4 has
been completed.
4. While continuing to hold the buttons the red indicator Status LED will
flash slowly and then rapidly after HomeLink
frequency signal from the hand-held transmitter. Release both buttons.
For detail instructions, refer to your Owner's Manual or visit www.homelink.com.
GENESIS
buttons while keeping the indicator light in view.
®
and hand-held
®
successfully trains to the
®
MEMO
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents