Taillamps, Turn Signal, Stoplamps And Back-Up Lamps - Pontiac Wave 2008 Owner's Manual

Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To replace a taillamp, turn signal lamp, stoplamp, or
back-up bulb:
1. Open the trunk or liftgate. See Trunk on page 2-10
or Liftgate (Hatchback) on page 2-12 for more
information.
Hatchback
Sedan
2. Remove the two screws and the lamp assembly.
3. Remove the bulb socket by turning it
counterclockwise.
4. Remove the bulb from the socket by pressing the
bulb and turning it counterclockwise.
5. Install the appropriate bulb into the socket.
6. Replace the bulb socket into the lamp housing.
Turn the bulb socket clockwise to secure.
7. Reverse Step 2 to reinstall the lamp housing.
5-51