Panasonic Palmcorder MultiCam PV-DC352 Operating Instructions Manual page 55

1, 1 1 1 1
2 2 2 2
3 3 3 3
Windows Me
Verify and update driver while Palmcorder is connected to the computer.
ª Verifying driver
(Palmcorder must be connected to computer.)
1
Select [Start] >> [Settings] >> [Control Panel], double click
[System], Device Manager tab and verify
[Panasonic DVC USB Driver] is displayed in
[Universal Serial Bus controllers] of [Device Manager].
≥If [USB Mass Storage Device] is displayed in [Universal Serial Bus
controllers] of [Device Manager] tab, we recommend updating the driver
by following the steps below.
ª Updating driver
1 1 1 1
Select [USB Mass Storage Device] in
[Universal Serial Bus controllers] of [Device Manager] and
click [Properties].
2 2 2 2
Select [Driver] and click [Update Driver].
3 3 3 3
Select [Specify the location of the driver (Advanced)] and
click [Next].
4 4 4 4
Select [Specify a location] in [Search for a better driver than
the one your device is using now. (Recommended)], refer to
the location of the driver and the driver file name, click
[Next].
≥Location of the driver (folder) varies depending on the computer used.
(e.g.: C:\\WINDOWS\INF\MTUSDVME.INF)
5 5 5 5
When the dialog box to finish appears, click [Finish].
≥Driver update is complete.
55